SUMMARY
The Maintenance Engineer III is responsible for creating a safe and secure environment by maintaining the buildings, grounds, and equipment in a safe and efficient manner, consistent with regulations and established policies, procedures and best practices. The Maintenance Engineer III is a vital partner in ensuring the physical plant of the organization meets the standards and expectations that risk management processes are in place and implemented, safety and mechanical equipment are in good working order. The incumbent will be able to preform skilled electrical, plumbing or other craft work to maintain machines, mechanical equipment, or building elements in good working condition.
PRIMARY RESPONSIBILITIES
- Follow established policies, procedures and practices. Complete job responsibilities efficiently and effectively. Maintain a sanitary and safe work environment. Maintain tools and equipment in a clean, safe, operable condition. Practice safe and effective use of needed equipment and tools. Be able to make knowledgeable adjustments to operational systems and equipment. Provide proper documentation of work per established procedures. Apply the knowledge and skills necessary for the position, including technical competence in the maintenance/engineering field. Maintain knowledge of organization and industry policies and practices that are appropriate to job responsibilities. Perform routine maintenance and repair on campus equipment to include plumbing, plastering, electrical, carpentry, mechanical etc. as directed in accordance with established procedures. Operate and maintain vehicles and grounds equipment used on the job in a safe operating condition. Be familiar with general operation of all applicable building systems. *
- Perform skilled electrical, plumbing or other craftwork, repair and maintenance to keep machines and mechanical equipment in good working. *
- Perform skilled preventive maintenance to ensure that equipment continues to run smoothly including filter changes, cleaning of coils, changing of belts, checking fluid levels and lubricating motor and shaft bearings. *
- Perform skilled electrical system repairs by installing switches, outlets, replacing light bulbs, ballasts, and inspecting electrical equipment for unsafe conditions.
- Perform skilled plumbing system repairs for water leaks, pipe breakage, plugged toilets, clogged drains (i.e. shower, sink, sewer), minor repairs to toilets, sinks and showers by replacing shut off valves, faucets, shower heads, etc.
- Perform skilled rough and finished carpentry work to include patching and painting of walls, staining of millwork trim and minor repairs to partitions, walls, doors, shelving, etc.*
- Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists. *
- Complete pipefitting, boiler maintenance, insulating, and a variety of machining tasks.
- Assist with painting duties as assigned. *
- Perform maintenance of multiple building elements. *
- Maintain an attractive campus appearance consistent with the design intent. Execute assigned responsibilities for buildings and grounds as defined by the site leadership. Assignments may include; floor care, resident moves, remodeling, painting, building maintenance, customer requests, landscape care, snow removal, pools and other projects. Repair buildings, floors, and/or stairs to ensure that all building systems operate efficiently and that the physical condition of buildings does not deteriorate. *
- Perform skilled level mechanical system repairs on exhaust fans, rooftop units, boilers, heat pumps, fan coils, temperature controls, and thermostat adjustments. *
- Repair buildings, floors, and/or stairs to ensure that all building systems operate efficiently and that the physical condition of buildings does not deteriorate. *
- Completes apartment turns in housing and room turns in the care center as needed. *
- Prepare and maintain appropriate documentation for the Physical Plant Department.
- Ensure safety in the facility by documenting and reporting any needed repairs. *
- Able to demonstrate good stewardship of available resources (supplies, utilities, time). Ensure that engineering supplies are replenished in work areas. May assist with ordering, receiving, stocking, maintaining, monitoring and tracking supplies, and control budget. Assist in preventive maintenance, equipment, materials and supplies tracking according to established procedures. *
- Perform general facility support. *
- Respond and complete work order requests in a timely and appropriate manner including but not limited to: ceiling tile replacement, building wheelchair and bed repairs, TV/remote service, hang pictures, move furniture, change batteries in smoke detectors, cut keys and replace nurse call lights and cords, etc. *
- Diagnose complex mechanical problems and determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary. *
- Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. *
- Ability to read and decipher blueprints, electrical schematics and diagrams as needed. *
- Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. *
6. Conduct all fire and life safety system tests, inspections, and maintain corresponding documentation in compliance with federal, state and regulatory agencies. *
- Create a positive customer experience by prompt attention to emergencies, service requests that also includes communicating completion of assigned tasks. Anticipate and act accordingly to common re-occurring customer needs. Graciously accommodate interruptions. *
- Operate and maintain vehicles and grounds equipment used on the job in safe operating condition. Be familiarly with general operation of all applicable building system. *
- Prepare and maintain appropriate documentation for the Engineering Department. *
- As appropriate, regulate pool temperatures and chemicals and maintain daily tracking logs. Perform minor repairs to pumps, heater units and sand filtration systems. (East Campus only) *
- Utilize computerized maintenance software (CMS) to track work orders, apartment turnovers, repairs, preventive maintenance. *
- Provide evening and weekend on-call coverage. *
- Performs various other maintenance related tasks as requested by management.
- Denotes Essential Functions of the position.
JOB SPECIFICATIONS
Education, Experience and Credentials
- High school diploma or equivalent required.
- Five or more years of experience with Mechanical Equipment and/or maintenance-related field required, preferably in a long-term care or housing setting.
- County General Hazardous Waste Generator or Industry specific (Health Care) Training preferred
- OSHA 30 Safety Certification, EPA 608 technician training, NFPA Life Safety Specialist certifications preferred, or other equivalent certifications preferred.
- State of MN Special Class Boilers License required. State of MN 2nd Class “C” Boilers license required or able to be obtained within one year.
- Certified Pool Operator (CPO) license require or upon hire, must obtain CPO within three months. (East Campus Only)
Required Knowledge, Skills and Abilities
- Advanced knowledge of applicable regulations and standards including, Occupational Safety and Health Administration (OSHA), Environmental Protection Agency (EPA), Hazardous Material Regulations (HAZMAT) the State Health Department, Centers for Medicare and Medicaid Services, OSHA, IBC, MN local Codes, and ability to apply said knowledge
- Ability to coordinate engineering work with in the facility. Coaching and mentoring staff through education, skills and competency process. Skills in budget and procedure/policy development. Skilled with documentation process.
- Must have extensive knowledge and experience with electrical installation and troubleshooting including but not limited to: low voltage, two and three phase electrical service and transformers as they apply. Able to work directly or to effectively direct staff or licensed electricians to provide quality solutions to complex electrical problems.
- Must be knowledgeable and experienced with plumbing installation and troubleshooting, with all aspects of plumbing and related equipment as they apply. Able to work directly or to effectively direct staff or licensed plumbers to provide quality solutions to complex plumbing problems.
- Knowledge and experience with Heating, Ventilation, and Air-Conditioning (HVAC) systems and operations and how they apply. Able to work directly or to effectively direct staff or technicians to provide quality solutions to complex HVAC needs.
- Able to perform routine inspections of work areas, create inspection reports, and able to discuss issues paying special attention to detail and problem areas.
- Able to perform maintenance on equipment and determining when and what kind of maintenance is needed.
- Able to monitor gauges, dials, and other indicators to make sure a machine is working properly.
- Detailed knowledge of materials, methods, and the tools involved in the construction or repair of buildings and other structures.
- Knowledgeable and experienced with diagnostics of machines and tools, including their designs, uses, repair, and maintenance. Detailed knowledge of machines and tools, including their designs, uses, repair, and maintenance.
- Must have working knowledge of mechanical, electrical and plumbing systems with a thorough understanding of building floor plans, blue prints and schematics.
- Able to display high levels of customer service, responding promptly and thoroughly to the inquiries and needs of individuals both internal and external to the organization in accordance with our PROUD standards.
- Communicate clearly and effectively both orally and in writing to all levels of people inside and outside the organization, including possessing good English speaking skills, fluency and understandability.
- Detail-oriented, organized and applies effective time management skills in order to meet all deadlines. Able to successfully prioritize and manage multiple tasks and numerous projects in a fast-paced environment
- Understand and maintain confidential nature of organization and resident information, including and in accordance to HIPAA regulations.
- Able to understand and follow facility and department safety and emergency procedures.
- Able to read, understand and follow directions for safe handling procedures when working with chemicals. Always maintain proper storage and monitoring of chemicals. Follow MSDS sheets for all precautions and first aid/emergency as necessary.
- Able to follow and adhere to Infection Control procedures related to Environmental Services.
- Familiar with computers and software, including using the Internet, Microsoft Office, Outlook and other applications.
- Able to follow protocol, providing privacy and respect, for the resident/tenant for entering homes/living spaces including making an appointment, call in advance, knock before entering and identify yourself.
PHYSICAL REQUIREMENTS NECESSARY TO PERFORM THIS JOB
Incumbent must be able to:
- Perform heavy work with frequent lifting/carrying of objects weighing up to 50 pounds unassisted and potentially up to 100 pounds with mechanical or physical assistance.
- Twist, turn, bend, stoop, kneel, squat, stand, walk and reach frequently in the performance of responsibilities including carpentry work, plumbing and electrical repairs, working with equipment, etc.
- Hear, speak and effectively verbally and orally communicate in the English language, including following oral and written instructions, in order to communicate with people inside and outside the organization.
- Apply manual dexterity, visual acuity and ability, for computer keyboarding, performance of preventative maintenance, working with equipment, review blueprints, diagrams, labels and other printed matter for the safe operation of equipment.
- Physical ability to move around organization/building area repeatedly throughout the day.
- Must possess valid MN driver’s license and be able to travel around the Twin Cities area.
- Able to work a flexible work schedule, including overtime, nights and weekends as required including attending meetings as needed.
- Provide evening and weekend on-call service to the facility.
TOOLS AND EQUIPMENT USED
Incumbent must be able to operate a variety of hand and mechanical equipment. In addition, they use various hand tools, ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
WORK ENVIRONMENT
The work is both indoors and outdoors. There will at times be long periods spent in extreme temperatures and weather conditions including heat, cold and humidity when performing facility maintenance (i.e. rooftop A/C units). There is exposure to chemicals, fumes, solvents, paints and lubricants. There is also exposure to odors, clutter, interruptions, emergencies, and challenging customer service situations.
This job description does not necessarily list all the functions or accountabilities of the job. Employees may be asked by management to perform additional duties and tasks. Management reserves the right to revise and update job descriptions at any time.
Sholom is dedicated to the health and safety of its residents, family members, and team members. All offers of employment are contingent upon successful completion of relevant background, employment verification and TB tests, as well as participating in mandatory vaccine programs (ex. COVID-19), testing requirements (ex. COVID-19, TB), and using designated PPE where and when required.
By signing this job description, I acknowledge that I can perform the duties and physical requirements of the position.
Sholom is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status.
