SUMMARY

The Millwright I is responsible for the maintenance, repair, and construction of mechanical systems throughout the facility. Such systems include, but are not limited to pneumatics, hydraulics, steam, gas and water. Required skills include, but are not limited to general mechanical repair, basic carpentry, welding, masonry, and plumbing.

ESSENTIAL JOB SKILLS AND RESPONSIBILITIES

Included but are not limited to the following. Other duties may be assigned as required:

All tasks shall be performed safely and competently with minimal to average supervision.
- Understand and practice all plant safety rules and housekeeping practices associated with their work.
Understand operation of furnaces, presses and hammers (able to learn how to operate for the sole purpose of troubleshooting) and how to troubleshoot all plant machinery, equipment, facilities, and their installations.
Repair, replace, adjust, dismantle, and assemble parts on a wide variety of machinery and equipment.
- Able to maintain, repair or replace:
  - Hydraulic valves, pumps, motors, hose, and piping replacements.
  - Pneumatic piping, plumbing, valves, diaphragm pump repair, regulators, and air filters.
Troubleshoot mechanical drive systems such as pulleys, chain systems, sprockets, gear boxes, couplings, etc.
Install, modify, and maintain piping systems for steam, air, gas, water, hydraulics, etc.
Lay out and perform simple carpentry using power and hand tools normally associated with the trade.
Use welding (STK, MIG) and burning equipment for minor repairs.
They shall be able to run equipment in the Maintenance Shop such as: pipe threaders, drills, saws or similar types of equipment. They shall be able to make simple repair parts and shall be able fabricate to reasonable tolerances.
Perform general building maintenance and upkeep functions such as, but not limited to, replacement of broken windows, general repair of doors and minor roof repairs.
Complete basic electrical repairs as required when adequately trained in basic electrical maintenance. Examples include, but are not limited to: resetting overloads, replacing solenoid coils, replacing fuses, and changing bulbs. As appropriate, electrical systems will be isolated and re-energized by Maintenance Electrician(s), but the Millwright I is required to follow personal lockout procedures.
All other duties as assigned.

EDUCATION and/or EXPERIENCE

High school diploma
One year certificate from college or technical school
3+ years related experience and/or training; or equivalent combination of education and experience.
Strong background with utilizing basic hand tools
Familiar with pneumatic and hydraulics: Able to read simple prints and sketches
Ability to read and interpret mechanical drawings
Able to do common methods of rigging or handling of heavy machinery or parts.
Welding: Capable of performing MIG and STK welding
Able to operate a variety of equipment which include, but are not limited to: cranes, hoists, tractors, welders, burning torches, benders, pumps, compressors, and lift trucks
Capable of working in a fast-paced environment
Able to handle up to seventy-five (75) pounds and physical dexterity to meet the mechanical needs of the facility
Willingness to work extended hours and open to work any shift
Willingness and ability to work overtime as needed

NOTE: Any skill is subject to possible demonstration and/or testing by Company and/or 3rd party, and if a Millwright I is unable to demonstrate competency in any aspect of the job, that Millwright may be afforded additional training in order to obtain necessary skills for the job. Inability to demonstrate minimum skill, may disqualify individual from the Millwright I classification.

LANGUAGE SKILLS
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY
Ability to carry out detailed written or oral instructions. Ability to effectively deal with problems involving known and unknown variables.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand, use hands to finger, handle or feel and reach with hands and arms; and talk or hear. The employee frequently is required to walk, climb, or balance. The employee is occasionally required to sit and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 75 pounds and frequently lift up to 50 pounds. Specific vision abilities require by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles and vibration. The noise level in the work environment is usually moderate.

********

We believe a workforce with diverse backgrounds and skills helps us realize our full potential. We are proud to be an equal opportunity employer, and we take affirmative action to ensure that minorities, women, individuals with disabilities and protected veterans are introduced into our workforce and given opportunities to grow.

Applicants must be U.S. Persons as identified by ITAR (Permanent Residents or U.S. Citizens).

SIFCO Forge has a very competitive compensation and benefits package, including medical, dental, vision, life insurance, short- and long-term disability, flexible spending accounts, and a 401(k) plan with an exceptional company match.

QUALIFICATIONS

To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disability to perform the essential functions.

EDUCATION and/or EXPERIENCE

One-year certificate from college or technical school
3+ years related experience and/or training; or equivalent combination of education and experience
Able to read and understand blue prints and engineering drawings
Capable of working in a fast-paced environment
Able to handle up to seventy-five (75) pounds and physical dexterity to meet the mechanical needs of the facility
Willingness to work extended hours and open to any shift
Willingness and ability to work overtime as needed and be placed on any shift

***

We believe a workforce with diverse backgrounds and skills helps us realize our full potential. We are proud to be an equal-opportunity employer, providing an inclusive workplace with growth opportunities for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual origin, gender identity, national origin, disability, or protected Veteran status.

SIFCO has a competitive compensation and benefits package, including medical, dental, vision, life insurance, disability, flexible spending accounts, supplemental insurance, and a 401(k) plan with a generous match.

If you need assistance with the application process due to a disability, please email Applications@sifco.com.

Sifco Industries Inc

New Jobs

Millwright I